Banner_11

SERVICE INTERVALS

BICYCLE SERVICE INTERVAL

INSPECT

  • Check chain for dryness & dirt – Wipe down and lube if nec
  • Check tires for damage or embedded debris
  • Check quick releases or through-axles for tightness
  • Check brake pads for wear

SERVICE

  • Set tire pressure with floor pump
  • Check shock pressure with shock pump

REPLACE

  • N/A

INSPECT

  • Check nuts & bolts for tightness
  • Check wheel true
  • Check frame, pivots, suspension, and components for wear, cracks, or dents
  • Check clipless pedal cleat bolts for tightness

SERVICE

  • Wipe down frame and fork
  • Lube chain and wipe down chain rings, cassette, derailleur pulleys
  • Inspect & tighten crankset

REPLACE

  • N/A

INSPECT

  • Check chain stretch, replace if necessary to keep chain ring and cassette wear to a minimum
  • Check tires for wear & cuts, replace if necessary
  • Check cables & housing for fraying & corrosion, replace if necessary
  • Check suspension pivots for tightness, adjust if necessary

SERVICE

  • Degrease and lube drivetrain
  • Lube derailleur pivots & pulleys
  • Lube brake & shift cables
  • Wipe down and lube suspension sliders

REPLACE

  • N/A

INSPECT

  • Inspect chainrings & cassette for wear, replace if necessary

SERVICE

  • Inspect frame, fork & components
  • Adjust bottom bracket
  • Tighten crank bolts
  • Tighten chainring bolts
  • Inspect pedals for wear & tightent
  • Adjust headset & check stem bolts
  • Adjust hub bearings front & rear
  • True & tension wheels
  • Lube Cables & Housing
  • Align Derailleur Hanger
  • Adjust brakes
  • Adjust front derailleur
  • Tighten & final check
  • Service suspension seals
  • Clean and grease suspension pivots
  • Bleed disc brakes
  • True & tension wheels
  • Grease all non-cartridge bearings

REPLACE

  • Replace chain
  • Replace cables & housing
  • Replace tires
  • Replace brake pads
  • Replace grips
  • Replace tubeless tire sealant
  • Replace shock oil

INSPECT

  • Check tire pressure – Top off with floor pump if nec
  • Check chain for dryness & dirt – Wipe down and lube if necessary
  • Check tires for damage or embedded debris
  • Check quick releases for tightness
  • Check brake pads for wear

SERVICE

  • N/A

REPLACE

  • N/A

INSPECT

  • Check nuts & bolts for tightness
  • Check wheel true
  • Check frame, pivots, suspension, and components for wear, cracks, or dents
  • Check clipless pedal cleat bolts for tightness

SERVICE

  • Wipe down frame and fork
  • Lube chain and wipe down chain rings, cassette, derailleur pulleys

REPLACE

  • N/A

INSPECT

  • Check chain stretch, replace if necessary to keep chain ring and cassette wear to a minimum
  • Check tires for wear & cuts, replace if necessary
  • Check bar tape for tears, replace if necessary
  • Check cables & housing for fraying & corrosion, replace if nec

SERVICE

  • Degrease and lube drivetrain
  • Inspect & tighten crankset
  • Lube derailleur pivots & pulleys
  • Lube brake & shift cables

REPLACE

  • N/A

INSPECT

  • Inspect chainrings & cassette for wear, replace if necessary

SERVICE

  • Inspect frame, fork & components
  • Adjust bottom bracket
  • Tighten crank bolts
  • Tighten chainring bolts
  • Inspect pedals for wear & tightent
  • Adjust headset & check stem bolts
  • Adjust hub bearings front & rear
  • True & tension wheels
  • Lube Cables & Housing
  • Align Derailleur Hanger
  • Adjust brakes
  • Adjust front derailleur
  • Tighten & final check
  • True & tension wheels
  • Grease all non-cartridge bearings

REPLACE

  • Replace chain
  • Replace cables & housing
  • Replace tires
  • Replace brake pads
  • Replace grips
  • Replace bar tape
bike-fit

Bike Fitting & Advice

Being avid cyclist’s ourselves is one thing; but we also understand the importance of good quality products being fitted correctly. Bio-mechanically, all equipment should be correctly fitted to its user, ensuring correct use of the product to alleviating the possibility of injury. The Complete Cyclist Team is on hand, offering full bicycle set-ups in store. While performing the set-up, each specially trained staff member has a valuable opportunity to connect with our client one-on-one to fully understand what level the cyclist is on. While on the in-door trainer, we also get a good opportunity to explain all the different controls of the bike to the client in a safe environment, if they have not cycled before. We offer a comprehensive set-up with every new bike purchased through the store, at no extra charge, as well as the bike set-up being a stand-alone service we offer to any customer. Apart from being one of the many value added services, this also ensures the best comfort and performance out of the products we sell.

race-supp

Race Support

The Complete Cyclist workshop team is often present at major events, where back-up servicing and repair is of the utmost importance. Mostly multi-day events, we also provide support and a few one-day events. To put your mind at ease inquire about our back-up service packages offered for major events which can be booked and purchased up front. This way you can leave the maintenance and repairs up to us so you can focus on your ride and your recovery. Keep an eye out at your next big event if you are in need of assistance, we may well be right there.

Banner_14

Bike Maintenance

At Complete Cyclist we only employ top quality mechanics who we are confident enough to put our name behind their work. Understanding the importance of an efficient workshop is crucial to any successful bicycle store, and this we take very seriously. Our qualified and skilled mechanics are not only good at what they do; they are also knowledgeable and very approachable to all our clients, which ensure trustworthy relationships. This is the reason we designed our workshop to be open-plan, allowing clients to speak to the mechanic while they are working. All parts used in our workshop are from leading brands, such as Shimano and SRAM, and only the best quality products are used. We also have the depth in our supply chain to source intricate and specialist parts to fit any product, making our workshop an appropriate choice destination for any cyclist. When servicing your bike, we inform you of the parts needed and the costs involved before carrying out the work. This eliminates any surprises when you arrive to pick up your bike.

Phone the shop today and book your bike in for the best service it will ever have!